Filtration and Drying in the Laboratory – From suspension to powder without product transfer - Filter Dryer Plant FDcompact
- Nominal volume 2 Liter, total volume 4 Liter (others on request)
- Filter plate and jacket with integrated pressurized water heating
- Exchangeable mesh-filter-plate (available porosities 1 to 200 µm)
- Height adjustable stirrer for the filter cake
- Compact: W x D x H = 730 x 600 x 1540 mm
- Easy opening with Clamp flange
- 2 feeding ports: 12 mm Swagelok or 29 mm screwed cap with conical ground joint for the connection of glass apparatus
- Sight- and light glass
- Tiltable construction for solid removal without opening of the apparatus, optional with additional solid removal valve for closed solid removal
- Touch-panel-operation and Siemens control system for automatic control of temperature, pressure, vacuum and nitrogen purge
- Adjustable safety temperature and pressure
- Text status and alarm messages
- Acoustic alarm
- Optional possibility of PC data acquisition via Ethernet-connection
Removal of the powder
View into the Filter Dryer
Technical details of the Filter Dryer
| Filter area: | 105 cm˛ |
| Filter porosity: | 10 µm (available from 1 to 200 µm) |
| Material: | Stainless steel 1.4404 / 316 L, sealings PTFE or FPM (others upon request) |
| Pressure: | –1 to 6 bar for filter and jacket |
| End vacuum: | 60 mbar |
| Temperature: | +20 bis 140 C° |
| Stirrer speed: | 1 to 50 RPM |
| Controller: | Simatic® ET 200 S /CPU 314 |
| Electronic measurements: | Temperatures (jacket and filter), pressure Stirrer speed |
| PC-connection: | Optional with additional Software |
| Electrical connection: | 230 Volt, 50/60 Hz, 1 phase, 16 A |
| Dimensions: | B x T x H = 730 x 600 x 1540 mm |
| Total weight: | 143 kg |
